Aluminum
Wheel Stripping.com Aluminum
Wheel Stripping: Products | Aluminum
Wheel Stripping.com Aluminum
Wheel Stripping: Products |
| Home Contents:
Aluminum
Wheel Stripping:
MILES #8648 Aluminum Wheel Stripper/s, Aluminum Wheel Clear Coat Remover/s and Aluminum Powder Coating Stripper/s for Stripping Aluminum Wheels. |
Aluminum Wheel Stripping - Stripping Products Summary Aluminum Wheel Powder Coating Stripper & Aluminum Wheel-Clear Coat Remover to Recondition Aluminum Wheels: Automotive Stripper: Aircraft Stripper: Metal Stripper to Strip Aluminum Wheels & Remove Paint, Aluminum Stripping Solutions.
How to: Remove Powder Coating-What's New? Eco Friendly: Green/Powder Coating Removal Product Solutions Provided to Clean Paint Hooks and Reclaim / Recycle Paint Rework, Exclusively from MILES Chemical Solutions. Environmentally Friendly: Green, Paint Strippers/Paint Removers for Stripping Paint and Powder Coating removal. E-Coating Paint Removers, Aluminum Strippers, Galvanized: Zinc and Magnesium-Paint Stripping Products to Remove Paint from Metal. Powder Coating Removal: Product Technologies, T E C H N I C A L D A T A
T E C H N I C A L D A T A DESCRIPTION: MILES #8641 MILES #8641 is an eco-friendly: green, multi-metal safe concentrated paint stripping solution formulated to (use with up to 50% water) to de-laminate cured coatings including: powder coating, e-coating and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates. #8641 can be used to clean racks daily and recycle paint rework. APPLICATION: MILES #8641 Utilize an immersion tank with lid, polypropylene-evaporation inhibitor-floats, ventilation and a mixer. Charge and maintain (replenish solution-loss) with 50% conc. #8641 and 50% water. Heat to 185F., immerse parts for 30-60 minutes or until coating is completely delaminated. Pressure-rinse parts with water and dry for reprocess. Use 5% of #8644 by tank volume, as required to maintain pH below 4.0, to maintain optimum stripping performance. Provide us with a
purchase order for a 1-gallon
or 5-gallon sample
container at $34.85/gallon,
plus $20.00 To Place orders go to: Order_Form T E C H N I C A L D A T A DESCRIPTION: MILES#8612 MILES#8612 ECO-POWDER STRIP-RTU is a ready to use (add no-water), eco-friendly: green, multi-metal safe paint strip solution formulated to dissolve cured coatings including: powder coating, (e-coating-only when heated) and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates. Used in conjunction with #8635 Evaporation Inhibitor at 5% concentration. APPLICATION: MILES#8612 ECO-POWDER STRIP-RTU is a unique formula that is used as received with no water dilution, at temperatures of 165F to 185F. Immerse rework parts in an immersion strip tank with a lid, ventilation and a mixer, for 30 to 60 minutes. May be used at Room Temperature for TGIC Powder Coating Removal overnight. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements. Rinse with warm water and reprocess through Paint. Use with MILES#8635 Evaporation Inhibitor at 5% concentration. Accelerate Powder Coating Removal with 5% adds of MILES #8605 as required to maintain pH between 11.5-12.5 Provide us with a
purchase order for a 1-gallon
or 5-gallon sample
container at $34.85/gallon,
plus $20.00 To Place orders go to: Order_Form T E C H N I C A L D A T A
DESCRIPTION: MILES#8648 AMBIENT POWDER STRIP-THIN is a paint strip solution formulated to under-cut: de-laminate and remove Powder Coating from Aluminum and Steel paint rework. #8648 can be used to strip Aluminum Wheels and e-coat racks: e-coat paint rework when HEATED. APPLICATION: MILES#8648 AMBIENT POWDER STRIP-THIN Utilize a stainless steel or polypropylene immersion tank with a lid, ventilation and a mixer. Immerse powder coated parts & hooks in MILES-#8648 at 50% concentration with water at 150F. to strip powder coated aluminum wheels and powder coat rework parts: remove powder coating in 15 to 20 minutes per 3 mils cured powder coating. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements, save on chemical, dollars and extend solution bath life. A pressure (1800-5000psi), water rinse is normally recommended when utilizing under-cutting: de-laminating technologies. The Benefits of under-cutting: de-laminating paint removal process solutions are many, including: easier to remove coating sludge in-sheets, resulting in longer bath life, lower operating cost, utilizing up to 50% water in the process, safer less hazardous for the operator and the environment. or Utilize MILES #8648, 100%- neat at ambient room temperatures for 1-3 hours for cast aluminum and overnight for steel paint hooks.
For (e-coat
removal, utilize #8648 heated only) at 50% concentration with
The
MILES
#8648
is $34.85/gallon plus Total 1-gallon sample of MILES #8648 plus shipping and handling $79.35/gallon in the US only. Note: MILES stripping solutions are ($24.85/gallon in 55-gallon drums),To Place orders go to: Order_Form T E C H N I C A L D A T A DESCRIPTION:
MILES #8649 Thickened, Brush-on, Room Temperature Stripper.
MILES#8649
a thickened brush-on product used at
room -
temperature to remove clear coat and TGIC Powder in 1-3 hours, European
and Japanese wheels require overnight application to strip
aluminum wheels. The loose
coating can be removed with a spark-less scraper, disposable cloth or
steel wool pads, and then rinse with soap and water, dry and reprocessed
through the paint or powder coating. The
MILES
#8649
is $34.85/gallon plus Total 1-gallon sample of MILES #8649 plus shipping and handling $79.35/gallon in the US only. To Place orders go to: Order_Form T E C H N I C A L D A T A DESCRIPTION:
Green Stripping
OxyStrip OxyStrip Eco-Friendly Paint & Varnish Stripper/Remover
Excellent for Wood Refinish Projects / Home and Construction Paint &
Varnish Removal Applications/ Indoor and Outdoor Paint Stripping Uses /
Stays Wet & Active up to 24 Hours / Easy to Use Fast Acting Gel, Clings
to Vertical Surfaces / Contains No-Hazardous Methylene Chloride or
Flammable Solvents, Pleasant Scent.
OxyStrip
eco-friendly stripping solution, an alternative that actually works
better than the current technologies offered as safe strip products.
OxyStrip is a non-methylene
chloride product, based on oxygen to accelerate coating removal
performance. OxyStrip and is
available by visiting:
http://www.mileschemicalsolutions.com/Oxy_Strip_1.htm on the web.
The product will remove all types of house paint and varnish from wood
and metal surfaces and is non-regulated for shipping and non-hazardous,
it has little to no-apparent odor, is thickened to hold to vertical
surfaces and will not evaporate as fast as many other products available
in today’s market place.
The use of chemical resistant gloves and safety glasses is
recommended for all chemical applications, do not utilize latex
rubber gloves with OxyStrip.
1-gallon of OxyStrip can cover up 100-200 square feet and is economical
compared to the products sold in smaller quantity containers on the
store shelf. Provide us with a
purchase order for a 1-gallon
or 5-gallon sample
container at $29.95/gallon,
plus UPS $20.00 shipping in the US only, to test at your facility. To Place orders go to: Order_Form
Visit The Powder Coating
Industries Latest Directory
Place your company at the Top of your States Category Today!
Additional Products Available From MILES:
- Water Based Paint Spray Booth Barrier Coatings
Powder Coating Stripper E-coating Paint Stripper Demonstration MILES Aluminum Powder Coating Stripper Visit: www.mileschemicalsolutions.com See: Paint Stripping Services.com |
|
|
||||
|
Achem, Inc. / Miles Chemical Solutions | Copyright © 1999 [Miles Chemical Solutions] | All rights reserved. |
||||
Mileschemicalsolutions.com
(Detroit)Mileschemicalsolutions.com
(Los Angeles)
Mileschemicalsolutions.com
