|
Home Contents:
Site Map
Product Summary
Stripping Recommendation
Stripping
Equipment
About Us
What's New
Contact Us
FAQ
Links
Page
Aluminum Paint Stripping
Products that Restore Original Surface Quality.
|
Aluminum
Wheel Stripping
- FAQ's
Aluminum
Wheel Stripping - Frequently
Asked Question.
Sample
Q. Can MILES Chemical Solutions #8648 Low-Temperature Aluminum
Wheel Stripping Concentrate Product be used to Strip Clear Coat, Paint
and Powder Coatings from Aluminum Wheels?
Sample A. Yes, MILES Chemical Solutions #8648 Low-Temperature
Aluminum Wheel Stripping Concentrate Product can be used to Strip
Clear Coat,
Paint and Powder Coatings from All Alloy Aluminum Wheels?
Contact Us
for: Aluminum Wheel Stripping,
Aluminum Wheel
Strippers; Product or
Aluminum Wheel Stripping Services: Quote to
Strip_Aluminum_Wheels
mailto:sam@mileschemicalsolutions.com
Benefits: of utilizing Miles Chemical
Solutions
Aluminum Wheel Stripping
Solution/s
Q. What are the advantages of stripping my paint rework parts in-house?
Q. What are the advantages of MILES new proprietary paint strip chemistries, when compared to other stripping technologies available?
Q. Will MILES proprietary
paint strip process strip liquid applied, (cured) paint as well as
stripping powder coat paints?
Q. What is the strip time for most production painted parts?
Q. Can you use MILES new proprietary
paint strip process for stripping racks and fixtures?
Q. Can MILES new proprietary
paint strip process be used on multi-metal substrates?
Q. Will my rinse water and spent strip solution be regulated or
non-regulated?
Q. Will MILES new
proprietary paint strip process alter my pretreatment
coating, chromate conversion coating or zinc phosphate coating weight or morphology?
Q. What type of equipment is recommended to utilize MILES
proprietary paint strip solutions?
Q. Where can I purchase a hot strip process tank capable of utilizing MILES
new proprietary
paint strip solution?
Q. How long will MILES new
proprietary paint strip solution
last?
Q. Can I purchase a 1-gallon or 5-gallon sample to test panels or wheels at our location?
1 - Q. What are the advantages of stripping my
paint rework parts in-house?
A. #1. The most important advantage of stripping your paint
rework parts in-house is the opportunity to maintain quality under your roof, without
damage that can occur in handling during transportation to and from the
paint strip service location. #2. Reduced turn-around time, in most cases
reduced from 3 to 5 days, to 1 to 2 hours stripping
in-house. #3. Cost Savings in-house, when compared to
added service and transportation costs.
2 - Q. What are the advantages of MILES new
proprietary paint strip chemistries, when compared to other stripping technologies available?
A. The advantages of MILES new proprietary paint strip
technologies are all so significant that
it's hard to place them in any particular order of importance. (a) MILES
proprietary formulas
are environmentally more friendly than hazardous regulated chemical technologies. MILES
proprietary paint strip processes are more operator
friendly. (b) MILES new proprietary technologies leave the
substrate surface in like-new condition with original surface
quality.
3 - Q. Will MILES proprietary paint strip process strip liquid applied,
(cured) paint as well as stripping powder coating paints?
A. Yes, MILES proprietary technologies will strip both liquid applied, (cured) paint as well as
stripping powder coating and
electro-coat paints. MILES also offers New Proprietary Low-VOC, Low-Temperature, Environmentally Friendly,
Aqueous-based processes to strip paint from Aluminum, Brass,
Zinc, Steel and Plastic substrates
4 - Q. What is the strip time for most production
paint rework parts?
A. The strip time in most cases is directly related to the paint film build on the parts. Most OEM production painted parts have a dry paint film build of from 1 mil up to 10 mils. MILES
proprietary paint strip process can remove paints up to 10 mils of paint in
30
minutes to a maximum of 1 hour for stripping automotive coatings that incorporate e-coat, base coat and clear coat coatings.
5 - Q. Can you use MILES new proprietary paint strip process for stripping racks and fixtures?
A. When thinking about paint stripping hooks, racks and fixtures with MILES process, the yes and no answer revolves around paint film build. Yes, if you can turn around the racks and fixtures, in order to maintain the paint build-up under 10 mils.
No it does not make sense to use chemistry for use on hooks, racks and fixtures that have paint build-up in excess of 10-20 mils. Stripping
E-coat
hooks, racks and fixtures is a good application for MILES
chemical strip processes, due to the fact that E-coat does not
build a high film build on the hooks & racks.
6 - Q. Can MILES new proprietary chemical paint strip
products be used on multi-metal substrates?
A. Yes, MILES new proprietary paint strip products can be used to strip paint from
aluminum, magnesium, brass & non-ferrous substrates in
addition to removing paint coatings from TPO & other plastic substrates.
7 - Q. Will my rinse water and spent strip solution be
regulated or non-regulated?
A. Environmental restrictions are different in many locations, however
many of MILES proprietary paint strip solutions are non-regulated,
Non-HAP and Non-SARA. Special attention should be taken to verify the paints being stripped are of a
non-regulated and non-hazardous make-up, in which case the rinse
water and spent strip solution will also be
non-regulated.
8 - Q. Will MILES new proprietary paint strip process alter my pretreatment
coating, chromate conversion coating or zinc phosphate coating weight or morphology?
A. No, MILES new proprietary strip process has demonstrated no adverse affect on zinc phosphate coating weight or morphology. In addition, we have seen no affect on chromate conversion coatings, this is important in keeping the chromate from leaching into your strip solution.
9 - Q. What type of equipment is recommended to utilize MILES
proprietary paint strip solutions?
A. Equipment requirements to consider to properly utilize MILES
proprietary paint strip process are as follows: (a)
A heated, insulated strip tank with a lid. (b) adequate exhaust,
MILES paint strip solution vapor when heated is not a HAP and
in most cases, can be exhausted outside the facility. (c) an
agitation mixer capable of circulating the MILES paint strip solution through the parts.
10 - Q. Where can I purchase a hot strip process tank capable of utilizing MILES
new proprietary paint strip solution?
A. MILES CHEMICAL SOLUTIONS will provide free of charge, a custom
process strip tank design, in addition to a free fabrication cost
quote. For strip tank quote, contact MILES Chemical Solutions at:
sam@mileschemicalsolutions.com
11 - Q. How long will MILES new proprietary
paint strip solution
last?
A. With regular additions of MILES new proprietary stripping solution, to make-up for carry-out and
regular removal or decanting of the precipitated paint sludge,
stripping solutions may last from 1-2 years. Performance is maintained with regular additions of
MILES new proprietary solutions.
12 - Q. Can
I purchase a 1-gallon or 5-gallon sample to test panels or wheels at our location?
A. Yes, MILES CHEMICAL SOLUTIONS offers 1-gallon and 5-gallon
samples at $34.85/gallon, plus shipping for each of our stripping
solution technologies.
To Place orders go to: Order_Form
We
accept:
MILES CHEMICAL SOLUTIONS
Visit
The Powder Coating Industries Latest Directory,
Place your company at the Top of your States Category Today!
|
Aluminum
Wheel Stripping.com
Aluminum
Wheel Stripping- FAQ's