Aluminum Wheel Paint Stripping Offers: Aluminum Wheel Stripper, to: Strip Aluminum Wheels, Aluminum Wheel Clear Coat Remover, Alloy Wheel Stripper, Aluminum Paint Stripping Products, Aluminum Powder Coating Stripper, Paint Stripping Chemical, Paint Stripping Service, Coating Removal Service, Paint Removal Products, Metal stripper, Automotive Stripper & Aircraft Stripper and much more...  

Site Map

Product Summary

Stripping Recommendation 

Stripping Equipment

About Us

What's New

Contact Us

FAQ

Links Page 

Aluminum Wheel Stripper: Aluminum Wheel Stripping:

Strip Aluminum Wheels: Aluminum Wheel Coating Removal Products and Aluminum Wheel Stripping Service, Available, Including: Aluminum Wheel Powder  Coating Remover and Aluminum Wheel Clear Coat Remover, Strip Aluminum Wheels to Recondition and Restore .

Aluminum Wheel Stripped in MILES #8648 Aluminum Powder Coat Stripper for Stripping Aluminum Wheels & Stripping Clear Coat from Aluminum Wheels: Eco-Friendly, Aluminum Wheel Stripping Solutions to Strip Aluminum Wheels.                                                       

 mailto:sam@mileschemicalsolutions.com 

Aluminum Wheel Stripper - Low Temperature: MILES #8648 and Room Temperature Thickened MILES #8649

Aluminum Wheel Paint Stripping products and Services/Aluminum Alloy Wheel Powder Coating Stripper to Recycle Costly Paint Rework. Aluminum Wheel Paint Stripper to Strip Powder and Remove Clear Coating  from  Aluminum Wheels & Steel Parts, Hooks, Racks & Fixtures in minutes.

Contact Us For a FREE - Paint Strip Products Recommendation or Paint Stripping Services, Quote:  

mailto:sam@mileschemicalsolutions.com    

Aluminum Wheel Stripping / How To:  Strip Aluminum Wheels,            Procedure Demonstrates: Aluminum Wheel Stripped in MILES #8648.

Aluminum Wheels can be safely, chemical stripped at low temperatures with MILES Chemical Solutions #8648. The Aluminum Wheel can be reconditioned by removing the old coating with MILES Chemical Solutions #8648 in approximately one hour and then re-coating the aluminum rims with durable powder coating.

Process Requirements:

*  A stainless steel or polypropylene tank to immerse the aluminum wheel/s.

*  An immersion heater.

*  A tank mixer for agitation, Note: Never use air agitation, chemical oxidation            will occur which decreases chemical bath life.

*  Polypropylene floating evaporation inhibitor balls

*  MILES Chemical Solutions #8648 Aluminum Stripping Solution Concentrate.

*  Water                                                                           ____________________________

Steps:

1) Utilize a Polypropylene or Stainless,

heated immersion strip tank.

2) Add 50% MILES Chemical Solutions #8648 and 50% water.

3) Agitate solution with mixer or circulation pump. Note: Never agitate with direct-air! Oxidation, decreases chemical bath life.

4) Heat solution up to to 150F.  

5) Soak wheels for 1.5 hours, while maintaining 150 Degrees F. Note: Utilize a tank lid and polypropylene floating evaporation inhibitor balls to reduce solution loss and replenishment requirements and  to extend chemical bath life.

6) Rinse the Aluminum Wheels with water and a pressure washer            to remove paint: powder and excess coating from recessed areas on the aluminum wheel surface.                                                                           ____________________________

Benefits:

After stripping, the aluminum alloy wheels have a pre-paint, original bright surface appearance and are ready to return to the powder coating process.  

The de-laminated coating sludge can be easily removed from the strip tank with a 75- mesh in-line, stainless basket strainer, skimmer or screen parts basket filter.

Note:

• MILES Chemical Solutions #8648 coating removal process is normally implemented in Paint Finishing and Powder Coating facilities, additionally at many Industrial-Coating Removal Service & Stripping Service Contractors worldwide.

• This is an easy to implement process in an Industrial Environment, such as in Paint, Finishing and Powder Coating Facilities and at Coating   Removal Service Providers. This aluminum wheel stripping process was not developed for individual consumer use.

• MILES#8649 a thickened brush-on product used at  room - temperature to remove clear coat and TGIC Powder 1-3 hours, European and Japanese wheels require overnight application to strip a single set of aluminum wheels. ____________________________

MILES #8648 Aluminum Strip: Powder Coat Stripper

DESCRIPTION:                                                                                                                       MILES#8648 AMBIENT POWDER STRIP-THIN is a paint strip solution formulated to under-cut: de-laminate and remove Powder Coating from Aluminum and Steel paint rework.  #8648 can be used to strip Aluminum Wheels and e-coat racks: e-coat paint rework when HEATED.

APPLICATION:

MILES#8648 AMBIENT POWDER STRIP-THIN                                                        Utilize a stainless steel or polypropylene immersion tank with a lid, ventilation and a mixer. Immerse powder  coated parts & hooks in MILES-#8648 at 50% concentration with water at 150F. to strip powder coated aluminum wheels and powder coat rework parts: remove powder coating in 15 to 20 minutes per 3 mils  cured powder coating. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements, save on chemical, dollars and extend solution bath life. A pressure (1800-5000psi), water rinse is normally recommended when utilizing under-cutting: de-laminating technologies. The Benefits of under-cutting: de-laminating paint removal process solutions are many, including: easier to remove coating sludge in-sheets, resulting in longer bath life, lower operating cost, utilizing up to 50% water in the process, safer less hazardous for the operator and the environment.

 or Utilize MILES #8648, 100%- neat at ambient room temperatures  for 1-3 hours for cast aluminum and overnight for steel paint hooks. 

For (e-coat removal, utilize #8648 heated only) at 50% concentration with water at temperatures of 150F.-185F. Strip time is 10 minutes to 15 minutes.

The MILES #8648 is $34.85/gallon plus UPS shipping & handling cost, which is $20.00/gallon plus an additional $26.50/gallon-material handling charge, due to the acidic pH-base, which helps to penetrate the coating.

Total 1-gallon sample of MILES #8648 plus shipping and handling $81.35/gallon in the US only.

To Place orders go to: Order_Form 

We accept:

 

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION:

MILES #8649 Thickened, Brush-on, Room Temperature Stripper.

MILES#8649 a thickened brush-on product used at  room - temperature to remove clear coat and TGIC Powder in 1-3 hours, European and Japanese wheels require overnight application to strip aluminum wheels.  The loose coating can be removed with a spark-less scraper, disposable cloth or steel wool pads, and then rinse with soap and water, dry and reprocessed through the paint or powder coating.  

The MILES #8649 is $34.85/gallon plus UPS shipping & handling cost, which is $20.00/gallon plus an additional $26.50/gallon-material handling charge, due to the acidic pH-base, which helps to penetrate the coating.

Total 1-gallon sample of MILES #8649 plus shipping and handling $81.35/gallon in the US only.

To Place orders go to: Order_Form 

  We accept:  

Aluminum Powder Coat Stripper for Stripping Aluminum Wheels, including:  Metal Stripper : Automotive Stripper & Aircraft Stripper.

                     

Visit The Powder Coating Industries Latest  Directory                                        Place your company at the Top of your States Category Today

 

Miles Chemical Solutions | Copyright © 1999 [Miles Chemical Solutions] | All rights reserved.